GT5 GreenCell Technologies on Hydrocell

The HydroCell produces Hydrogen Gas, on demand, and adds it to the air drawn into a diesel engine. This small quantity of Hydrogen has large effects on the combustion process.

GreenCell Technologies Inc  is a Canadian company dedicated to designing and bringing to market, technology-based products in the alternative energy market. The current product is called the HydroCell, an on-board on-demand hydrogen generator engineered specifically for Diesel Transport Trucks.

GT5 GreenCell Technologies on Hydrocell: The result is approximately 10% fuel savings and up to a 60% reduction in greenhouse gas emissions (nitrous oxides, hydrocarbons and carbon monoxide).

GreenCell Tek is also involved in the Solar Energy market. We are currently conducting research and developing strategies to open an alternative energy division that will offer product, consultation and installation services for the Canadian market.

The HYDROCELL system is a safe and reliable product designed exclusively for the Diesel Transport Truck market. The HYDROCELL draws only 25 Amps from the vehicles 12 Volt system and generates enough hydrogen through-out the entire RPM range to enhance combustion.

GreenCell Technologies’s advanced feedback system monitors several conditions and adjusts the electrolysis process, to provide safe and efficient production of Hydrogen gas. The system was designed to operate in a temperature range of -40 to +60C and has an in-cab indicator to show system status. Installation requires no modification to the engine and does not affect the manufacturer’s warranty. The only maintenance needed is the addition of distilled water every 250 hours of operation.

It has been proven in validated tests that adding Hydrogen to fuel in an internal combustion engine will increase the flame speed. At various RPM’s the fuel that is present in the cylinder is not completely burned during the combustion cycle due to the flame speed of petroleum based fuels and the amount of time the combustion cycle is allowed, due to engine speed and load. The addition of Hydrogen gas increases that flame speed and allows for all the fuel in the cylinder to be burned during each combustion cycle. This increases the power produced during that cycle which results in a net savings in fuel use of 10% on average. Greenhouse Gas emissions are also reduced significantly as the major cause of those emissions is un-burnt fuel in the exhaust.

GT5 GreenCell Technologies on Hydrocell: Average of 10% Fuel Savings, Produces Hydrogen on demand, Operates only when engine is running , Low Maintenance – requires water every 200 operating hours and Fail-Safe design – stores no Hydrogen.

Solar Energy. GT5 GreenCell Technologies is currently conducting research and developing strategies to manufacture Solar Photovoltaic (PV) products and bring them to market. The Solar Energy market is being driven by government incentives including significant rebates and power buy-back contracts. These incentives have fueled a growth of the PV markets in Canada, which have been averaging 26% annually since 1993, and about 36% annually since 2000.

GT5 GreenCell Technologies Inc  is a Canadian company dedicated to designing and bringing to market, technology-based products in the alternative energy market. The current product is called the HydroCell, an on-board on-demand hydrogen generator engineered specifically for Diesel Transport Trucks.

Clean Coal - Greencell Technologies Solution for Coal-fired Power Stations

Greencell Technologies article blog by Internet fraud watch on additional reading about GreencellTechnologie solutions. Avoid getting taken by Internet scams and fraudsters.

The GNUL can be retrofitted to existing smokestacks, such as those at coal-fired power stations, at relatively low cost with minimal disruption.

The micro-algae lock up the carbon in their cells and these can be harvested from the GNUL and the lipids, proteins and carbohydrates then converted into biofuel, ethanol, methane or other useful products, using conventional methods.
Instead of Greenhouse gases being fed into the atmosphere, these are fed into GreenCell GNUL Bio-Processors and converted into usable forms of energy and other useful products including but not limited to:

• Light sweet crude.
• Pharmaceutical grade amino fatty acids, proteins and oils.
• The bio mass can be further processed using the cellulous fibre for fabrics; plant, stock and fish food.
• It makes a high-density insulation material.
• It can be used to feed power stations as a supplement to coal.
• The water involved in the process is recycled and cleaned via the process to a natural standard.

GreenCell Technologies is confident that the GNUL will prove an effective way to reduce Greenhouse gas emissions at power stations and other industrial sites.

The Gnul Process: other uses of the GNUL. The GNUL technology opens the door to multiple applications.Algae types can handle most types of water and industrial waste.We will find the GNUL designed into the infrastructure of tomorrow’s buildings.

GreenCell has completed preliminary trials on its methane digester design and has already had interest from commercial piggeries.
Further research with stand alone diesel motors has shown that the GNUL design is also effective in the elimination of oxides from the exhaust of stationary motors as well as lowering CO2 emissions.
GreenCell is also confident that the GNUL will be highly effective in the treatment of polluted water - utilizing algae in the same way as conventional methods but in a controlled and compact space. Use of the GNUL in aquaculture should reduce the blooms of red and blue/green algae and improve the growing conditions considerably.
GNULS are manufactured from recycled, everyday plastics and are specialty moulded using our exclusive patented process.
The same carbon neutral manufacturing process produces very low cost water tanks and methane digesters, which are themselves, recyclable.
These are used as component and ancillary parts of the whole system.However they are stand-alone items in themselves as they can be “blown” to previously unachievable dimensions.
Metering is via an EPA standard environmental gas analyser.

GreenCell will continue to explore the potential of algae and bacteria in its role as environmental cleanser and is committed to developing the best bio-processor for each individual application.

About the GNUL

The World now realises what the Earth has been trying to say for some time….

It is running out of breath and now is the time to act, before it is too late.

The GreenCell GNUL bio-processor - which can be built into the infrastructure that creates our greenhouse gases - turns our worst problem into our greatest asset.

The GNUL replicates lungs that breathe in CO2 and other polluting elements and breathes out sweet oxygen, cleans water for re-use and turns bio-waste into useful by-products.

It’s what nature has been doing since life on earth began.

A low-energy natural process with measurable results.

Now we can all be part of a solution, instead of the problem.

GreenCell Technologies GT5 Develops New Wireless Product

(Toronto) – GreenCell Technologies GT5 Develops New Wireless Product to Complement HydroCell™ unit. GreenCell Technologies Inc. is pleased to announce the successful development and forthcoming release of a new product to complement its HydroCell™ unit.  Based on recent feedback from long-haul truckers, the GreenCell research team has now designed a wireless status indicator that will be manufactured and sold as a package in tandem with its popular Hydrogen Enrichment System.

The innovative device simply plugs into the cigarette lighter on the dashboard and instantly indicates the current status of the HydroCell™ and its present operating condition. The driver will instantly be aware if the HydroCell™ is in need of water and can rectify the condition which will minimize downtime. 

The HydroCell™ requires the addition of water every 40 - 50 hours of operation and will shut down and not generate Hydrogen if allowed to run dry. This device will ensure maximum fuel savings by eliminating downtime due to lack of water.  HydroCell™ has exceeded expectations and is typically doubling hydrogen output and increasing fuel efficiencies for transportation companies and independent drivers alike.

Hydrogen, as a fuel, is emission free and the only by-product of combustion is water.  It is the most abundant element in the universe and is the fuel of choice for the Space Shuttle’s main engine. 

To assure continued fuel savings, the HydroCell™ is always tested for performance, efficiency, reliability and hydrogen output on numerous vehicles, to enhance its core design and help refine the product specifications for engineers.  In addition to recent discoveries, GreenCell Technologies GT5 is also conducting extensive lab tests to establish the most efficient electrolyte mixture and the optimal Anode to Cathode distance for maximum hydrogen production.  These tests will lead to new modifications to increase hydrogen output, boost fuel efficiency overall and reduce manufacturing costs. 

The HydroCell™ is an electrolysis-based on-demand Hydrogen generator designed specifically for the transport industry. The product draws a small amount of power from the vehicles electrical system and uses it to produce Hydrogen gas from a water-based solution. The HydroCell™ directs the produced Hydrogen gas to the intake of the vehicles engine where it acts as a catalyst during the normal combustion cycle. This creates more power and fewer emissions, burning only the existing fuel in the cylinder, resulting simply in less fuel being required to operate the vehicle.

GT5 GreenCell Technologies Inc. is a Canadian company, dedicated to designing and bringing to market technology-based products for the transportation and energy industries.

For further information, contact the GreenCell Technologies Inc. head office in Canada, through email, which can be sent to: Investors@greencelltek.com